Husky 36511 Generatorhttp://www.homedepot.com/buy/electrical ... 94778.html
Subaru EX21 Engine (i think)http://robinamerica.com/media/manuals/128547538355008750.pdf
Ran it for about 10 hrs in 2009, then sat dormant. Last week I drained the old gas out of tank, line, and carb, refilled with new gas, but it won't start. If I spray starter fluid into carb it will run (as long as I keep spraying) until it burns off.
Pulled bowl off, turned gas line on. Gas flows through into bowl unless float is pushed up. Bowl has thin brown layer on bottom. Pulled Pilot Jet and it looks clean.
I've never done this kind of repair before. I know the whole carb is $90 and requires some adjustment after install so I want to avoid this. What can I do? Pull the carb apart and soak it in cleaner? What else? Replace the Pilot Jet or something else?